HomeBeholder 3-Axis Handheld DS1 Quick to setup, easy to use, and extremely affordable are the key features of the new Beholder DS1 Camera Stabilize. Whether you are a celebrity chaser, interviewer, short film maker, wedding photographer or just an amateur, you will be amazed at the professional results shot with Beholder DS1. It is a perfect choice. TRD's years of experience in developing gimbals for handheld and aerial stabilizers are realized in the DS1’s design. DS1 adds improved payload of 3.8 pounds (1700 grams), room for a camera’s flip-out LCD, and micro USB port for wired remote control. The stabilizer has a 32-bit controller with dual IMU sensors. The 32 bits processor enables multi-mode control which is more effective and efficient for movie shooting. DS1 arrives pre-programed and ready to use out of the box. You can put your camera in any position including upside down and create continuous shots via remote control. With an extendable rod Beholder DS1 can also create crane, slider, dolly and time lapse effects with ease.

Just like MS1, the new DS1 is compact enough to share a backpack along with other gear such as a camera, lens, and other accessories. The stabilizer offers the camera movement of a shoulder rig, a slider, a jib, and a stabilizer in a convenient package. The compact size of the stabilizer makes it possible to shoot in locations that normally don’t allow commercial/professional filming. Camera operators of all levels will find the Beholder DS1 Camera Stabilizer to be a rewarding and improved experience. Supported cameras are listed in below section, including Sony A7 Series, GH4, BMPCC and Canon 5D/7D. The stabilizer has a ¼ inch mount at the bottom of the handle, great for mounting DS1 to a monopod for a stunning jib shot. Another feature of the Beholder DS1 Stabilizer is the built in 5 way joystick offering complete control over pan/tilt and mode selection. DS1 features adaptive algorithm for preventing vibrations and supports up to three user-configurable modes with a toggle button.

It also supports battery voltage drop compensation which ensures proper control of the drive motors during the whole life of the battery.kulkea backpack Stabilizer: 300 x 175 x 160 mm, 11.8 x 6.9 x 6.3 Inchespuma men's barometer laptop backpack bag black Package: 375 x 200 x100 mm, 14.8 x 7.9 x 3.9 Inchesdakine coast cooler backpack for sale Net weight (excluding camera): 1090 grams, 2.4 Poundsnsw eugene backpack Total package: 1790 grams, 3.9 Pounds Maximum Payload: 1700g
, 3.7 Pounds • Sony A7 series • GH4, GH7, series • Canon 5D, 7D • Nikon D810, D800 Battery: 3* 3.7v Li-ion 18650 2600mAh

Range of Motion: 90°-180° Pitch: 355°±180° (effective operating range) Roll: 355°±60° (effective operating range) Battery Life: 3~4 hours (depending on conditions, such as camera & lens weight, operating environments and settings) • Compact Design, fits in a backpack • 5 way joystick • Fun and easy to use • Tool free operation • Battery 3.7 volts 18650, 2600mAh • USB charging port • Micro USB for wired remote control • 32 bit controller • Dual IMU sensors • Beholder DS1 Camera Stabilizer • Camera quick release plate • USB LED light One year manufacturer’s warranty provided by TRD. Specification subject to change without notice.Ninja 3 DSLR Rig Ninja 3 is a super light DSLR rig built for speed, and stability.  The triangular support system gives you just the right amount of contact points to pull smooth professional shots.  Great for those on the move, documentaries, travel journalists, and Assassins.

Works with most mirror-less cameras and DSLR's with 1/4″ mounts. Canon: 1Dc, 5D Mark III, Mark II, 7D, 60D, T2i Nikon: Nikon D900, D800E, D700, D800, D3100, D3200, D3300, D5300, D610, D7100, D810, D90 Sony: a7S, a7R, a7, a7II, a900, a5000, a6000, NEX-5T, NEX-6 Blackmagic: Blackmagic Pocket Cinema Camera Limited Time Special Get Free Shipping! Choose an optionNo Follow FocusWith Follow FocusClear Made from Carbon fiber and CNC machined Aircraft Grade Aluminum to create the lightest most compact rig yet.  Comes equipped with a machine washable durable shoulder pad.  The Ninja 3 easily packs into a backpack or suitcase for convenient travel. Quick and Easy setup The Ninja 3 assembles in seconds.  Just lock and load the rig and you’re ready to go.  It works with your favorite quick release system such as the Giottos MH 621 (not included) for easy setup. The 3-point design gives you just enough stability to give you smooth shots without the extra weight of a full rig. 

The Ninja 3 Rig gives you support against your shoulder much like a riffle.  The control grip is made from high density rubber and polyurethane to give you a solid grip during a shoot.  The last point of contact is from your follow focus hand which balances the weight of the unit for extra stability during use. The shock absorbing Grip Handles that come standard with the V Series R8 DSLR Rig are not only beautiful, but they’re really damn comfortable. The weatherproof handle gives you the most secure grip in all weather conditions. It works well under freezing cold conditions, or hot and sunny environments. The rubber grip won’t make your hands freeze and won’t slip while you’re sweating. It works with standard 15mm clamps so you can customize your rig to just about any configuration by upgrading a few parts.You can always pick up additional accessories to add it to your arsenal. We love infinite possibilities. The integrated Interlocking Frame design allows you to add different joints to different parts of the rig more securely.

It “nests” joints to eliminate slipping/twisting and builds a stronger joint compared to using just screws that lock into place. The V Series DSLR Rig is built from Ultra light Aircraft grade 6061 aluminum with a T6 treatment. The matte black hard anodized (type III) components limits unwanted glares and light reflections. It also adds superior surface strength for increased lifespan under professional use. It’s In The Details. All V Series Rigs are designed with high precision CAD while rigorously tested for quality, performance, and durability at the highest standards. V Series DSLR Rig parts are produced using the latest CNC technology for the highest precision and accuracy. Choose from 2 Models We carry a barebones model without the Follow Focus for those that already own one.  Our second model includes the Follow Focus which is reversible and has a removable marking disc. Ultra light Aircraft grade 6061 aluminum with T6 treatment. V-Lock integrated for quick & rigid connections.